View larger
UV'Glass - UV-LED Resin in 100g
LCC30-100X
3134725017962
New product
Glossy and transparent, UV'GLASS Resin is a ready-to-use liquid resin to be used with a UV-LED lamp. The latter allows the UV-LED resin to cure very quickly, in 1 minute! It does not require mixing to be done and therefore no waste of resin. It does not bubble or yellow.
It is ideal to use with molds, glass, plastic, jewelry... Make an infinite number of creations by adding dried flowers, gold leaf, color pigments or glitter.
100g format = economical!
⬨ Instructions:
1. Choose the mold (LCC19-M1, M2, M4 or M5), charm, jewelry or other accessory to customize. Pour a layer of resin (1 to 3 mm depending on the desired thickness) and cure for 1 min under the lamp.
2. Personalize the creation with dried flowers, glitter or other decorations, then add resin before curing the creation again 1 min under the lamp.
3. Create the desired number of layers while curing the creation under the lamp between each layer from 1 to 3 mm. If necessary, cure the creation under the lamp for longer, until it is dry and not sticky. WARNING, when handling the resin may be hot!
⬨ Precautions:
Not suitable for children under 12 years old. Read the package leaflet carefully before use. It is recommended to work in a well-ventilated area and to wear a mask, gloves and protective glasses. Avoid contact with eyes, skin and clothing. In case of contact, rinse immediately. Do not ingest. Protect your worktop to prevent damage. Do not leave within reach of children. Tool cleaning: acetone or white spirit.
⬨ Information:
- Capacity: 100g (32 jewels, 12 phone cases)
- Metal, glass, silicone...
- Use 20°/25°
- Storage 15°/30°
- Thickness: 1 to 3 mm
- Drying: 5 min
⬨ FAQ:
How should I protect myself? We advise you to protect your worktop, to ventilate the room and not to work in the presence of children. These products are strongly discouraged for pregnant women. Also, it is advisable to wear a pair of gloves, a mask and a pair of protective glasses.
What to do if the resin remains sticky? You can create the desired number of layers with UV'Glass Resin, however it is important to cure it under the lamp in layers of 1 to 3 mm. If the creation remains sticky, don't hesitate to put it back to harden under the lamp for a few more minutes.
What is the wavelength of UV'Glass resin? The wavelength is 365nm, just like the UV'Glass lamp.
