View larger
Coffret Créatif Résine UV 25ml + Lampe UV 24W + 9 pots accessoires or/argent + 2 moules
LCC30-BOX1
3134725024298
New product
Everything you need to learn about the UV Resin technique and make up to 8 to 10 pieces of your choice.
Contents: 1 x 25g UV Resin / 1 x 24W UV Lamp / 9 x Gold/Silver Accessories / 1 x 29 Jewelry Mold / 1 x 9 Christmas Shapes Mold
⬨ UV'Glass Resin, glossy and transparent, is a ready-to-use liquid resin to be used with a UV-LED lamp. The latter allows the UV-LED resin to cure very quickly, in 1 minute! It does not require mixing to be done and therefore no waste of resin. It does not bubble or yellow. It is ideal to use with molds, glass, plastic, jewelry... Make an infinite number of creations by adding dried flowers, gold leaf, color pigments or glitter.
1. Pour a layer of resin (1 to 3 mm) into a mould and harden for 1 minute under the lamp.
2. Personalize the creation with dried flowers, glitter or other decorations, then add resin before curing the creation again 1 min under the lamp.
3. Create the desired number of layers while curing the creation under the lamp between each layer from 1 to 3 mm. If necessary, cure the creation under the lamp for longer, until it is dry and not sticky. If you are using a mold, flip it over and click the button on the lamp once. WARNING, when handling the resin may be hot!
Not suitable for children under 12 years old. Read the package leaflet carefully before use. It is recommended to work in a well-ventilated area and to wear a mask, gloves and protective glasses. Avoid contact with eyes, skin and clothing. In case of contact, rinse immediately. Do not ingest. Protect your worktop to prevent damage. Do not leave within reach of children. Tool cleaning: acetone or white spirit.
⬨ The 24W UV'Glass Lamp allows you to cure all your UV'Glass resin creations quickly. The result is very dry and shiny. Its legs fold up, allowing you to easily carry it with you. If you use a mold, make sure that it allows light to pass through. Very easy to use with its 60/120 sec touch button. Dimensions: 16(W) x 6.8(H) x 8.5(D) cm. The lamp must be powered only at low voltage (connected via the supplied USB cable, to a computer for example), corresponding to the marking of the device.
⬨ The filling accessory kit allows you to embellish your resin creations and add a touch of sparkle to your creativity! Shades specially chosen by designers from the world of resin, with 9 gold and silver decorative accessories, matching decorations in key colours, to embellish your creations on all occasions. They are thin, light and easy to mix into resin. The colors are miscible to achieve subtle or intense effects according to your preferences. You can cast them in molds and create jewelry, keychains, personalize your phone case... You can also use them for any other DIY project. The various gold and silver accessories are easy to grab in the jars, which close with their screw caps, so you don't lose any!
Contents: 1.5g of fine gold glitter, 1.5g of fine silver glitter, 1g of 3mm gold hexagonal glitter, 1g of 3mm silver hexagonal glitter, 1g of gold mica powder, 1g of silver mica powder, 2 jars of gold leaves, 1 jar of silver leaves.
⬨ The Résin'Mould is a high quality silicone mould for resin, it can also be used with other materials such as plaster, waxed concrete, etc... Its specific soft silicone material allows optimal use with epoxy resins and UV resin. The creations are easily unmolded and the fineness of the mold allows the sparkling shine of the resins to be preserved. With the picot integrated into some molds, you will only have to add a ring after drying and mount your piece on jewelry, key rings...
- 29 jewelry mold: 126*159*8 mm (1g on average for 1 piece).
- 9 Christmas shapes mould: 115*113*5 mm (2.4g on average for 1 piece).
FAQ:
How should I protect myself? We advise you to protect your worktop, to ventilate the room and not to work in the presence of children. These products are strongly discouraged for pregnant women. Also, it is advisable to wear a pair of gloves, a mask and a pair of protective glasses.
What to do if the resin remains sticky? You can create the desired number of layers with UV'Glass Resin, however it is important to cure it under the lamp in layers of 1 to 3 mm. If the creation remains sticky, don't hesitate to put it back to harden under the lamp for a few more minutes.
What is the wavelength of UV'Glass resin? The wavelength is 365nm, like the UV'Glass lamp.
